AEG AG901G Manuale Utente

1. You should regularly check that the nozzle wheels and the brush roll are clean in order to avoid scratching sensitive fl oors.2. Start Ergorapido

Ergorapido’s dust container must be emptied regularly and the dust container and the fi lters need to be cleaned to maintain a high suction power.Never

The brush roll, the hose and the wheels may need to be cleaned if they become blocked or jammed for any reason. 1. First turn Ergorapido off. Push th

1. Batteries should always be run flat before removed. Ergorapido must be disconnected from the charging station when removing the batteries. Undo the

Safety precuations10

Consumer information11 or contact us on our Customer Helpline:0800 222 825

WarrantyElectrolux South Africa (Pty) Ltd., (‘Electrolux’) warrants to the original purchaser (‘the Purchaser’) that the appliance identified on this l

SRDAG901/4G-Rev 1Share more of our thinking at www.aeg.com

Green fact: Every AEG ErgorapidoGreen saves about 1.5 litres of crude oil and more than 65 litres of water during the manufacturing process. 90% less

Green fact: Every AEG ErgorapidoGreen saves about 1.5 litres of crude oil and more than 65 litres of water during the manufacturing process. 90% less

REDUCED ENERGY CONSUMPTIONThe lifecycle studies we’ve done show that a third of the environmental impact of a vacuum cleaner comes from the handling a

REDUCED ENERGY CONSUMPTIONThe lifecycle studies we’ve done show that a third of the environmental impact of a vacuum cleaner comes from the handling a

2

3

Unpacking and assembly Charging station 1. Check that all parts are in the box. Fit the handle by carefully inserting it into the lower main body. Ma

Charging 1. Ergorapido: The indicator light will come on once the Ergorapido is positioned correctly in the charging station. When fully charged, the