AEG L7FC8432BI Manuale Utente

USER MANUALEN User ManualWashing MachineL7FC8432BI

The inlet hose1. Remove the inlet hose from inside thedrum.2. To connect the water inlet hose towardsthe proper direction and with the properinclinati

Ø 40 mmTo a stand pipe with vent-holeDirectly into a drain pipe at a height of notless than 60 cm (23.6”) and not more than 100cm (39.3”).The end of t

553 mm596 mm140 mm76 mm50 mm50 mm819 mmIf hoses run behind theappliance, make sure thatnothing closes the smallrecess indicated with themeasures 50 x

1. Remove the screws of the top cover on therear of the appliance and install the anti-tilting device as shown in the drawing.~10mm2. Adjust the anti-

Reversibility of the cupboard doorCarry out the cupboard door reversibilitybefore the appliance is built in completely.MNOIf the cupboard door has to

16-22 mm22±1,5 mm449mm595-598 mmØ 35 mm12,5 - 14 mmSet the position of the lower hole respectingdimensions and distances shown in thedrawing (449 mm).

2N1EDCCounter-magnetThe appliance is pre set for a magneticclosure.For a correct closure:1. Position the screw C and the counter-magnet D on the magne

5. CONTROL PANEL5.1 Control panel description112 9 810111372 3 4 5 6On/OffStart/PauseCottonsSyntheticsDelicatesOutdoorSteamSpin/DrainRinseAnti-allergyD

The Temperature area: Temperature indicator . Cold water indicator.Child safety lock indicator.Door locked indicator.Delay start indicator.The digital

6. DIAL AND BUTTONS6.1 IntroductionThe options/functions arenot available with allwashing programmes. Checkthe compatibility betweenoptions/functions

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

cheaper electricity tariffs are available.In some programmes the rinses areperformed with more water.If you touch the Start/Pause button,the appliance

6.11 Child LockWith this option you can prevent childrenfrom playing with the control panel.To activate/deactivate this option, holddown the Plus Stea

7. PROGRAMMES7.1 Programme ChartProgrammeDefault tem-peratureTemperaturerangeReferencespin speedSpin speedrangeMaxi-mumloadProgramme description(Type

ProgrammeDefault tem-peratureTemperaturerangeReferencespin speedSpin speedrangeMaxi-mumloadProgramme description(Type of load and soil level)Outdoor30

ProgrammeDefault tem-peratureTemperaturerangeReferencespin speedSpin speedrangeMaxi-mumloadProgramme description(Type of load and soil level)Steam-1 k

ProgrammeDefault tem-peratureTemperaturerangeReferencespin speedSpin speedrangeMaxi-mumloadProgramme description(Type of load and soil level)20min 3kg

ProgrammeSpin No SpinPrewash1)Stains 2)Extra RinseSoft PlusPlus SteamDelay StartTime SaveCottons Eco Synthetics

8. SETTINGS8.1 Acoustic signalsThis appliance has different acousticsignals, that operate when:• You activate the appliance (specialshort tune).• You

CAUTION!Make sure that no laundrygets caught between theseal and the door to avoidrisk of water leakage anddamage to the laundry.Washing heavily oiled

• Do not exceed to liquiddetergent dose indicated on theflap.• Do not set the prewash phase.• Do not set the delay startfunction.5. Measure out the de

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

10.8 The ProSense Systemload detectionThe programme duration inthe display is referred to a medium/high load.After touching the Start/Pause button,the

10.11 Opening the door -Adding garmentsIf the temperature and levelof the water in the drum aretoo high and/or the drum isstill rotating you should no

Turn the programme dial to set a newcycle.If the dial is rotated to the "Reset"position , the appliance automaticallyturns off in 30 second

• To help the environment, do not usemore than the recommended quantityof detergent.• Follow the instructions that you findon packaging of the deterge

12.4 Door sealRegularly examine the seal and removeall objects from the inner part.12.5 Cleaning the drumRegularly examine the drum to preventunwanted

4. Insert the detergent drawer into theguide rails and close it. Run therinsing programme without anyclothes in the drum.12.7 Cleaning the drain pumpW

2. Place a suitable bowl below the drain pumpaccess to collect the water that flows out.Always keep a rag nearby to dry up any waterspillages when rem

8. Clean the filter under the water tap.219. Put the filter back into the special guides byturning it clockwise. Make sure that youtighten the filter

12.8 Cleaning the inlet hose and the valve filter12345°20°12.9 Emergency drainIf the appliance cannot drain the water,carry out the same procedure, de

13.1 IntroductionThe appliance does not start or it stops during operation.First try to find a solution to the problem (refer to the table). If the pr

– staff kitchen areas in shops, offices and otherworking environments;– by clients in hotels, motels, bed & breakfast andother residential type en

13.2 Possible failuresProblem Possible solutionThe programme doesnot start.• Make sure that the mains plug is connected to the mainssocket.• Make sure

Problem Possible solutionYou cannot open the ap-pliance door.• Make sure that a washing programme that ends with waterin tub, has been selected.• Make

CAUTION!Risk of burns! Make surethat the watertemperature is not toohigh and the laundry is nothot. If necessary, wait untilthey cool down.CAUTION!Ris

Programmes Load(kg)Energyconsump-tion (kWh)Waterconsump-tion (litre)Approxi-mate pro-grammeduration(minutes)Remain-ing mois-ture (%)1)Delicates40°C2 0

Spin Speed Maximum spin speed 1351 rpm1) The appliance works correctly if the water pressure is not lower than 0.05 MPa (0.5 bar). If you cannotconnec

The 'standard 60 °C cotton programme' and the 'stand-ard 40 °C cotton programme' are the standard washingprogrammes to which the i

www.aeg.com46

ENGLISH 47

www.aeg.com/shop157019871-A-462018

• Do not use the appliance beforeinstalling it in the built-in structure.• Do not install or use a damagedappliance.• Do not install or use the applia

substances. It can damage rubberparts of the washing machine.Prewash such fabrics by hand beforeloading them into the washingmachine.• Do not touch th

3.3 UnpackingWARNING!Use the gloves.WARNING!Remove all the packaging and the transit bolts before installing theappliance.1. Put two polystyrene packa

5. Remove the power supply cable andthe drain hose from the hose holders.It is possible to see waterflowing from the drainhose. This is due to thetest

3.5 Positioning and levellingx41. Install the appliance on a flat hard floor.WARNING!Make sure that carpets do notstop the air circulation belowthe ap