AEG HG795540XB Manuale Utente Scaricare il pdf (Pagina 13)

Make sure that the gas

supply pressure of the

appliance obeys the

recommended values. The

adjustable connection is

fixed to the comprehensive

ramp by means of a

threaded nut G 1/2". Screw

the parts without force,

adjust the connection in the

necessary direction and

tighten everything.

A B C

A) End of shaft with nut

B) Washer

C) Elbow (if needed)

Rigid connection:

Carry out connection by using metal rigid

pipes (copper with mechanical end).

"Flexible" connection with mechanical

end:

• Natural gas: connection carry out

with a flexible pipe with mechanical

end which is screwed directly on the

elbow finishing the slope of the

appliance.

• Butane/Propane: use a flexible tube,

equipped with it's collars if it is worth

visiting over all it's length and if the

appliance runs only on butane. If the

appliance runs on Propane, use a

flexible pipe with suitable metal end.

Flexible nonmetal pipes connection:

If it is possible to easily control the

connection in its full area, you can use a

flexible pipe. Tightly attach the flexible

pipe by clamps.

Liquid gas

Use the rubber pipe holder for liquid

gas. Always engage the gasket. Then

continue with the gas connection.

The flexible pipe is prepared for apply

when:

• it can not get hot more than room

temperature, higher than 30°C;

• it is no longer than 1500 mm;

• it shows no throttles;

• it is not subject to traction or torsion;

• it does not get in touch with cutting

edges or corners;

• it can be easily examined in order to

make sure its condition.

The control of preservation of the flexible

pipe consists in checking that:

• it does not show cracks, cuts, marks of

burnings on the two ends and on its

full length;

• the material is not hardened, but

shows its correct elasticity;

• the fastening clamps are not rusted;

• expired term is not due.

If one or more defects are visible, do not

repair the pipe, but replace it.

WARNING!

When installation is

complete, make sure that

the seal of each pipe fitting

is correct. Use a soapy

solution, not a flame!

8.3 Injectors replacement

1. Remove the pan supports.

2. Remove the caps and crowns of the

burner.

3. With a socket spanner 7 remove the

injectors and replace them with the

ones which are necessary for the type

of gas you use (see table in

"Technical Information" chapter).

4. Assemble the parts, follow the same

procedure backwards.

5. Replace the rating plate (it is near the

gas supply pipe) with the one for the

new type of gas supply. You can find

this plate in the package supplied

with the appliance.

If the supply gas pressure is changeable

or different from the necessary pressure,

you must fit an applicable pressure

adjuster on the gas supply pipe.

ENGLISH

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 19 20

Commenti su questo manuale

Nessun commento

Modely	Typ Dokumentu
CRMS Rack Mount Kits	Uživatelský manuál Kontron CRMS Rack Mount Kits User Manual, 8 stránky
CP3-CMM1	Uživatelský manuál Kontron CP3-CMM1 User Manual, 10 stránky
CPCI	Uživatelský manuál Kontron CPCI User Manual, 22 stránky
CP6-BP8-P47-STD	Uživatelský manuál Kontron CP6-BP8-P47-STD User Manual, 12 stránky
CP6-BP8-P47-STD-SL	Uživatelský manuál Kontron CP6-BP8-P47-STD-SL User Manual, 12 stránky
CPCI Generic backplane	Uživatelský manuál Kontron CPCI Generic backplane User Manual, 29 stránky
CP3-SVE-P200AC	Uživatelský manuál Kontron CP3-SVE-P200AC User Manual, 10 stránky
CP3-SVE-P200DC	Uživatelský manuál Kontron CP3-SVE-P200DC User Manual, 10 stránky
CP3-SVE-P200DC-24V	Uživatelský manuál Kontron CP3-SVE-P200DC-24V User Manual, 10 stránky
CP3-SVE-M180AC	Uživatelský manuál Kontron CP3-SVE-M180AC User Manual, 8 stránky
CP3-BP8-M-RIO	Uživatelský manuál Kontron CP3-BP8-M-RIO User Manual, 10 stránky
CP3-BP8-P47-RIO	Uživatelský manuál Kontron CP3-BP8-P47-RIO User Manual, 12 stránky
CP3-SVE-M100DC	Uživatelský manuál Kontron CP3-SVE-M100DC User Manual, 12 stránky
CP3-SVE-M76AC	Uživatelský manuál Kontron CP3-SVE-M76AC User Manual, 10 stránky
CP3-BP4-M	Uživatelský manuál Kontron CP3-BP4-M User Manual, 8 stránky
CP305	Uživatelský manuál Kontron CP305 User Manual, 36 stránky
CP-ADAP-P47-PB (6U)	Uživatelský manuál Kontron CP-ADAP-P47-PB (6U) User Manual, 10 stránky
CP6-BP4-PB-RIO	Uživatelský manuál Kontron CP6-BP4-PB-RIO User Manual, 10 stránky
CP-ADAP-P47-PB (3U)	Uživatelský manuál Kontron CP-ADAP-P47-PB (3U) User Manual, 10 stránky
CPCI Backplane	Uživatelský manuál Kontron CPCI Backplane User Manual, 30 stránky

AEG HG795540XB Manuale Utente Pagina 13

Commenti su questo manuale

Kontron ETX-Starterkit manuály

Kontron ETX-Starterkit Uživatelský manuál (16 strany)

Tabulka s obsahem

Další produkty a příručky pro Hardware Kontron

AEG HG795540XB Manuale Utente Pagina 13

Commenti su questo manuale

Prodotti e manuali riguardandi Piani cottura AEG HG795540XB

Kontron ETX-Starterkit manuály

Kontron ETX-Starterkit Uživatelský manuál (16 strany)

Tabulka s obsahem

Další produkty a příručky pro Hardware Kontron