AEG L61271WDBI Manuale Utente

USER MANUALEN User ManualWasher DryerL61271WDBI

Child safety lockThis symbol comes on when you activate the child lock function.4.3 Phase indicatorsABCAfter you have pressed the button Start/Pause,t

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Wool/Silk30°C - Cold2 kg1200 rpmMachine washa

ProgrammeSpinStains 1)TimeSave 2)ExtraRinseDelay StartEconomy 3) Cottons + Prewash Synthetics Easy Iron Delic

Dryness Level Type of fabric Load(kg)Spinspeed(rpm)Suggestedduration(mins)Iron DrySuitable for ironingCottons and Linen(sheets, tablecloths, shirts,et

• The washing programme stops withthe water in the drum. The drum turnsregularly to prevent the laundrycreases.• The door stays locked. You must drain

3. Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.4. Put a small quantity of detergent inthe compa

Off = Reset programme/switching OFFof the applianceIf you turn the programmedial to another programmewhen the appliance isworking, the yellow indicato

corresponding indicator starts flashing.Press Start/Pause button again to restartthe programme.10.8 Cancelling a runningprogrammeTurn the selector dia

2. Turn the programme dial to theprogramme applicable for the itemsto dry (cottons or synthetics).To have a good dryingperformance do not exceedthe ma

To have a good dryingperformance do not exceedthe maximum drying loadsrecommended in the usermanual. Do not set a spinspeed lower than theautomatic sp

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

• Be careful with the curtains. Removethe hooks and put the curtains in awashing bag or pillowcase.• Do not wash laundry without hems orwith cuts. Use

• Fabrics with residue of hair sprays, nailsolvents or similar.• Garments with foam-rubber ormaterials similar to foam-rubber.13.8 Garment labelsWhen

Regularly examine the seal and removeall objects from the inner part.14.5 Cleaning the detergent dispenser1.MAX122.MAX3. 4.MAX14.6 Cleaning the drain

1. Unplug the appliance.2. If it is necessary, wait until the water has cooled down.A B3. Place a container close to the pump tocollect any spillage.A

128. Put the cap back on the emergencyemptying hose and place the latter back in itsseat. Replace the filter into the pump byinserting it correctly in

WARNING!Make sure that thetemperature is more than 0°C before you use theappliance again.The manufacturer is notresponsible for damagescaused by low t

Problem Possible solutionThe appliance does notfill with water properly.• Make sure that the water tap is open.• Make sure that the pressure of the wa

Problem Possible solutionThe washing results arenot satisfactory.• Increase the detergent quantity or use a different deter-gent.• Use special product

Use the gloves. Remove the external film. Ifnecessary, use a cutter.Remove the cardboard top. Remove thepolystyrene packaging materials.Remove the int

Put one of the polystyrene packagingelements on the floor behind the appliance.Carefully put down the appliance with therear side on it. Make sure not

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

Remove the three bolts. Use the key suppliedwith the appliance. Pull out the plasticspacers.Put the plastic caps in the holes. You can findthese caps

• After having levelled the appliance,tighten the lock nuts.WARNING!Never place cardboard, wood or similar materials under the appliance tocompensate

• Make a U shape with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to

To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to

Remove the screws of the top cover on therear of the appliance and install the anti-tilting device as shown in the drawing.~10mmAdjust the anti-tiltin

12HingesTo mount the hinges it is necessary to drilltwo holes (dia. 35 mm, depth12.5-14 mmdepending on the depth of door furniture) onthe inner sid

17. TECHNICAL DATADimension Width/ Height/ Depth/Total depth596 mm/ 820 mm/ 544 mm/ 560 mmElectrical connection VoltageOverall powerFuseFrequency230-2

ENGLISH 37

www.aeg.com38

ENGLISH 39

• Do not install the appliance behind a lockable door, asliding door or a door with a hinge on the oppositeside, that would prevent the appliance door

www.aeg.com/shop132905824-A-372017

removers should be washed separately with an extraamount of detergent before being dried in the washerdryer.• Do not use the appliance if items have b

• Remove all the packaging and thetransit bolts.• The floor area on which the applianceis to be installed must be flat, stable,heat resistant and clea

• Remove the door catch to preventchildren or pets from becomingtrapped in the drum.• Dispose of the appliance inaccordance with local requirementsfor

3.3 How to activate the childsafety deviceThis device prevents children or petsfrom being closed in the drum.Turn the device clockwise, until thegroov

4.2 DisplayThe display shows the following information:Duration of the set programmeWhen you set a programme, the display shows the duration in hours