AEG ATC1521 Manuale Utente Scaricare il pdf (Pagina 63)

9.5 Detaching the worktop

2

3

1

To remove the worktop, please proceed

as follows:

• Unscrew the left and the right screws

at the back.

• Push the worktop backwards and lift it

up.

• Store the screws in a safe place to-

gether with the worktop.

9.6 Fitting and mounting to continuous worktop

Before fitting, change the door opening

direction if necessary (see: Door reversi-

bility).

• Push the appliance carefully into the

niche.

• Take care that the mains cable is not

jammed in.

• Check distance from wall (see: Instal-

ling under a continuous worktop).

• Level the appliance by screwing the

two adjustable feet at the front in or

out, thus ensuring a stable position.

• With a suitable screws (depending on

the design of the worktop and the dis-

tance between the appliance and the

worktop, not supplied), fix the appli-

ance under the worktop through the

upper door hinge. If necessary, equal-

ize the gap between the door hinge

and the worktop with a suitable wash-

er (plastic or wood, not supplied). This

will prevent bending of the hinge and

possible failure of door function.

ENGLISH 63

1 2 ... 58 59 60 61 62 63 64 65 66 67 68

Commenti su questo manuale

Nessun commento