AEG L61470BI Manuale Utente

USER MANUALEN User ManualWashing MachineL61470BI

ProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Mix 20°20°C3 kg900 rpmSpecial programme for c

ProgrammeSpinStains 1)Extra RinseTime Save 2)Drain Delicate Rinses Jeans Refresh Mix 20° Cottons Eco

Programmes Load (kg) Energy con-sumption(kWh)Water con-sumption(litre)Approxi-mate pro-gramme du-ration (mi-nutes)Remainingmoisture(%)1)Standard 40°C

7.5 Time SaveWith this option you can decrease theprogramme duration:• Press this button once to set"Shortened duration" for items withdaily

10. DAILY USE10.1 Loading the laundryOpen the water tap. Connect the mainsplug to the mains socket.1. Pull the door handle to open theappliance door.2

If you have chosen a delayed start withtheDelay start button, the appliance willbegin the countdown.If you set an incorrect option, the yellowindicato

If the Extra Rinse indicator after a fewminutes goes off, the door can beopened.WARNING!If you cannot open the door but youneed to open it, turn the p

b. manually redistribute the load sothat the items are spaced evenlyaround the tub;c. press the Start/Pause button. Thespin phase continues.11.2 Stubb

Always follow theinstructions that you find onthe packaging of theproduct.12.3 Maintenance washWith the low temperature programmes itis possible that

WARNING!Before unscrewing the pumpcover, switch the applianceoff and remove the mainsplug from the socket.WARNING!When the appliance isoperating and d

CONTENTS1. SAFETY INFORMATION...32. SAFETY INSTRUCTIONS...

6. Remove foreign bodies and fluff from thefilter seat and from the filter impeller.7. Check carefully whether the pump impellerrotates (rotation is n

3.Clean the valve filter on the back of theappliance with a toothbrush.4.45°20°When you reconnect the hose to the back ofthe appliance, do not turn th

13. TROUBLESHOOTINGWARNING!Refer to Safety chapters.13.1 IntroductionThe appliance does not start or it stopsduring operation.First try to find a solu

Problem Possible solutionThere is water on thefloor.• Make sure that the couplings of the water hoses are tightand there is not water leakages.• Make

Use the gloves. Remove the external film. Ifnecessary, use a cutter.Remove the cardboard top. Remove thepolystyrene packaging materials.Remove the int

Put one of the polystyrene packagingelements on the floor behind the appliance.Carefully put down the appliance with therear side on it. Make sure not

Remove the three bolts. Use the key suppliedwith the appliance. Pull out the plasticspacers.Put the plastic caps in the holes. You can findthese caps

• After having levelled the appliance,tighten the lock nuts.WARNING!Never place cardboard, wood or similar materials under the appliance tocompensate

• Make a U shape with the drain hose.On the edge of a sink• Make sure that the plastic guide cannotmove when the appliance drains. Attachthe guide to

To a sink spigot• Refer to the illustration. Put the drain hosein the spigot and tighten it with a clip.• Make sure that the drain hose makes aloop to

1. SAFETY INFORMATIONBefore the installation and use of the appliance,carefully read the supplied instructions. Themanufacturer is not responsible f

16-22 mm22±1,5 mm416mmX595-598 mmØ 35 mm14 mmDoorThe dimensions of the door should be:• width 595 - 598 mm• thickness 16-22 mm• the height X depends o

ABCEDWARNING!Do not remove the screw B.If the door has to be opened from left toright, invert the position of the plates E, themagnet D and the plate

www.aeg.com/shop132938001-A-042017

• The ventilation opening in the base (if applicable)must not be covered by a carpet, mat, or any floorcovering.• The appliance must be connected to t

cable. Should the mains cable needto be replaced, this must be carriedout by our Authorised Service Centre.• Connect the mains plug to the mainssocket

3. PRODUCT DESCRIPTION3.1 Appliance overview7 8 9101 234561. Detergent dispenser2. Control panel3. Door handle4. Rating plate5. Drain pump filter6. Fe

4. CONTROL PANEL4.1 Control panel description110 9 8 7 62 354ABC110 9 8 7 62 354ABC1Programme dial2Display3Delay start button (Delay start)4Phase indi

Duration of the selected programme• After setting a programme, the duration is displayed in hours and mi-nutes (for example ).• After the programme

5. PROGRAMMES5.1 Programme ChartProgrammeTemperature rangeMaximum loadMaximum spinspeedProgramme description(Type of load and soil level)Washing progr