AEG HG795440XB Manuale Utente

HG795440XBIE GB ENGAS HOB USER MANUAL

Electrical RequirementsPermanent electrical installation must comply with the latest I.E.E. Regulations and localElectricity Board regulations. For yo

WARNING!Make sure that the cut off plug is disposed of safely. A cut off plug put into a 13 amp sock-et is a safety hazard. There is a risk of electri

Kitchen unit with ovenThe hob recess dimensions must obey the indication and the kitchen unit must be equippedwith vents to let a continuous supply of

Always light the burner before you put cookware.To light the burner:1. Turn the control knob counterclockwise to the maximum position ( ) and push

12341Burner cap2Burner crown3Ignition candle4ThermocoupleWARNING!Do not keep the control knob pushed for more than 15 seconds.If the burner does not l

When you install the grate of the Triple Crown burner afterwards, align the hollow part ofthe grate with the reference on the plate attached to the gl

WARNING!Pots must not enter the control zone. Flame will heat up the control zone.Do not put the same pan on two burners.WARNING!Make sure pot handles

• The pan supports are not dishwasher proof; they must be washed by hand.• When you wash the pan supports by hand, take care when you dry them as the

WHAT TO DO IF…Problem Possible cause RemedyThere is no spark when lightingthe gas• There is no electrical supply • Make sure that the unit isconnected

MOD.PROD.NO.SER.NODATAMOD.PROD.NO.SER.NODATAMODELMODELMOD.PROD.NO.SER.NO.03 ITMADE IN ITALYTYPE230V-50HzIP2000491 2 31Stick it on Guarantee Card and

FOR PERFECT RESULTSThank you for choosing this AEG product. We have created it to give youimpeccable performance for many years, with innovative techn

Electric supply: 230 V ~ 50 Hz3 core flexible cable with non rewireable plugfitted with a 3 amp cartridge fuseCategory: II2H3+Gas connection: R 1/2&qu

Packaging materialThe packaging materials are friendly to the environment and can be recycled. The plasticcomponents are identified by marking: >PE

22

23

www.aeg.com/shop 397249201-A-412011

CONTENTS4 Safety information7 Installation12 Product description12 Operation15 Helpful hints and tips16 Care and cleaning18 What to do if…19 Technical

SAFETY INFORMATIONWARNING!These instructions are only valid in the countries whose symbols appear on this booklet'scover.For your safety and cor

• The cookware must not enter the control zone.• Make sure that the cookware does not protrude over the edges of the cooking surfaceand that it is cen

• Before installation, make sure that the local supply conditions (gas type and pressure)agree with the adjustment of appliance. The adjustment condit

INSTALLATIONWARNING!The following instructions about installation, connection and maintenance must be carriedout by qualified personnel in compliance

1231End of shaft with nut2Washer3ElbowConnection to the gas supply should be with either rigid or semi-rigid pipe, i.e. steel or cop-per.The connectio

Adjustment of minimum levelTo adjust the minimum level of the burners:1. Light the burner.2. Turn the knob on the minimum position.3. Remove the knob.