L 73483 FL EN User manual
The data of this table are approximate. Different causes can change the da-ta: the quantity and type of laundry, the water and ambient temperature.Pro
• The washing programme stops withthe water in the drum. The drum turnsregularly to prevent the laundry crea-ses.• The door stays locked. You must dra
8. BEFORE FIRST USE1.Put 2 litre of water in the detergentcompartment for washing phase.This activates the drain system.2.Put a small quantity of dete
Liquid or powder detergent1.122.A3.B4.• Position A for powder detergent (factory setting).• Position B for liquid detergent.When you use the liquid de
•The indicator stops to flash andstays on.•The indicator starts to flash on thedisplay.• The programme starts, the door islocked and the display sh
• The acoustic signal operates (if it is ac-tivated).•In the display a comes on.•The indicator goes off.•The door lock indicator goes off.• Remove
10.2 Stubborn stainsFor some stains, water and detergent isnot sufficient.We recommend that you remove thesestains before you put the items in theappl
11.4 Door sealRegularly examine the seal and removeall objects from the inner part.11.5 Cleaning the detergent dispenser1.122.3. 4.11.6 Cleaning the d
1. 2.2113. 4.215.126.7. 8.2118www.aeg.com
9. 11.7 Cleaning the inlet hose and the valve filter1.1232.3. 4.45°20°11.8 Emergency drainBecause of a malfunction, the appliancecannot drain the wat
CONTENTS1. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32. SAFETY
1.Disconnect the mains plug from themains socket.2.Close the water tap.3.Remove the water inlet hose.4.Put the two ends of the inlet hose ina containe
Problem Possible solution Make sure that the filter of the inlet hose and the filterof the valve are not clogged. Refer to “Care and clean-ing”. Mak
Problem Possible solutionThe appliance fillswith water and drainimmediately.Make sure that the drain hose is in the correct position.The hose may be t
appliances marked with the symbol with the household waste. Return theproduct to your local recyclingfacility or contact your municipaloffice.ENGLISH
www.aeg.com/shop132916401-B-442014
1. SAFETY INFORMATIONBefore the installation and use of the appliance, careful-ly read the supplied instructions. The manufacturer isnot responsible i
• If the supply cord is damaged, it must be replaced bythe manufacturer, its service agent or similarly quali-fied persons in order to avoid a hazard.
Water connection• Make sure not to cause damage to thewater hoses.• The appliance is to be connected tothe water mains using the new sup-plied hose-se
3. PRODUCT DESCRIPTION1 2 356741Worktop2Detergent dispenser3Control panel4Door handle5Rating plate6Drain pump filter7Feet for the appliance level3.1 F
4.1 DisplayA B C DA)The temperature area:– : Temperature indicator– : Cold water indicator.B)The spin area:– : the Spin speed indicator– : the No Spin
ProgrammeTemperature rangeType of load and soilMaximum load, Maximum spinEasy Iron1)60°C - ColdSynthetic fabric items. Normal soil and light soil.3 kg
Programme options compatibilityProgramme
Commenti su questo manuale